My Cart

Your Shopping Cart is Empty

Shop All Stores

Peerless 835017 XXLS 12" Aluminum Cone 4 ohm

Peerless 835017 XXLS 12" Aluminum Cone 4 ohm
Click to enlarge
Price: $246.00
Product ID : 835017
Manufacturer: Peerless
Weight: 16.00 lbs
E-mail to a friend | Add To Wish List

Purchase

  • 10% off for 10+

Description

Peerless 835017 XXLS 12" Aluminum Cone Subwoofer

This 12 inch 4 ohm member of the XXLS product family has all the design features suitable for a high performance, high excursion subwoofer driver. The motor features a double ferrite magnet motor, supporting high excursion, and aluminium shorting rings and pole extenders, lowering and linearizing the inductance of the overhung voice coil. The PP cone is vented under the dust cap, to reduce air compression. The suspension system features a low-creep rubber surround, and a nomex spider, ensuring long-term reliability under high power conditions. The product also features a rigid cast aluminium basket.

  • 4 ohm impedance
  • Black aluminum cone
  • Large roll rubber surround
  • Low distortion motor
  • 50mm voice coil diameter
  • 12.5mm linear excursion (x-max peak)
  • Suitable for home or autosound systems

Sealed Box Alignment:

Home: You can use this woofer in a sealed and stuffed box of about 1.25 cubic feet for an in home F3 of 45Hz.  If used with a plate amp that has a built in boost, it might get down to the mid to upper 30's.

Car: If a 1 cubic foot sealed box is used in a vehicle, assuming 6dB of cabin gain, your F3 would be about 27Hz.

Vented Box Alignment:

Home:  You can use a 2.5 cubic foot box with a 3" diameter vent by 13" long for an F3 of 30Hz.  If using a plate amp with a built in boost, it should go to the lower 20's.

In a 3.3 cubic foot box with 3" diameter vent by 9" long your f3 will be about 26Hz.  

Car: Sealed boxes are usually recommended for autosound applications as vented boxes can seem boomy.

Comment on Facebook

Product Reviews

Log Into Your Account or Register to write a review.
Reviewed by Tech9
03/05/2013 - 11:08:32 PM
Look doesn't mean anything
First of all i want to say thanks to the Tech at Madison Sound, he was very helpful. Now to the Subwoofer, well i want to build a very nice sound stage for my car, i got all the right mid and high but there wasn't a nice subwoofer out there for my taste (low distortion,sensitive and efficiency and will fit in my car custom enclosure) in till a member at www.diymobileaudio.com recommended peerless xxls . Well before i order this sub from Madison sound i was running dayton audio HO for two week and it was ok sub but it require a lot of power!!! Well the Peerless xxls solve my problems ,it very efficiency at low volume doesn't need a lot of power to get a great out put, the spec sheet said 1 cubic ft. for seal box but i have my in 1.6 cubic :) , bass sound very smooth but oh man i was so disappointed when i got the packed this morning!!!!!!!!! it was so light compare to the dayton audio HO.... but a good sub meant to hear not seen.