Audax TM010JL13 10mm polymer dome tweeter - 8 ohm

Sale Price: $1.90
Compared at: $7.80
You Save: $5.90


Manufacturer: Audax
Product ID : TM010JL13
Weight: 0.12 lbs
Manufacturer: Audax
E-mail to a friend


Audax TM010JL13 10mm Polymer Dome Tweeter - 8 ohm

*Special Surplus Buy!*

The Audax balanced drive tweeters are a long running industry standard. They have been used by many famous speaker brands in a multitude of loudspeaker models over the years. The 10mm performs very well at 6,000 Hz and above. A perfect cost effective choice for small speaker designs and/or high crossover points.
  • Ultra compact design
  • Balanced drive concept with area equally divided between one piece dome and active suspension
  • Powerful neodymium magnet
  • Ferrofluid cooled voice coil
  • Formerless voice coil piston
  • Polymer faceplate construction
  • Made in France


Nominal Impedance: 8 ohm
Resonance Frequency (fs): 3000Hz 
Nominal Power: 25W (12dB crossover at 6,000Hz)
Sensitivity: 87dB
Voice coil diameter: 10mm
X-max Peak: 0.25mm

Response and Impedance Curve

Crossover Recommendations

3mfd capacitor for a 6dB roll off at 6,000Hz
3.9mfd or 4mfd capacitor in series and a 0.1mH coil in parallel for a 12dB crossover at 6,000Hz
Use smaller cap values for a higher crossover point

Physical Dimensions

Faceplate round part diameter/width: 34.4mm
Faceplate lenth: 59mm
Depth from front of faceplate to bottom of terminal: 23.3mm
Tweeter front opening (for rear mounting): 28.9mm

The larger 0.205" terminal is the positive (QC205)
The smaller 0.187" terminal is the negative (QC110)

The faceplate was custom designed for a particular branded installation, see pictures for detail. 

Packaged in plastic trays, there are 56 tweeters to a flat.

Comment on Facebook

Product Reviews

Login or Register to write the first review.