Audax TW010F1 10 mm Polymer Dome Tweeter

Price: $7.80


  • Buy 10 - 10,000 and get an additional 10 % off
Manufacturer: Audax
Product ID : tw010f1
Weight: 0.20 lbs
Manufacturer: Audax
E-mail to a friend


Audax 10mm Polymer Dome Tweeter

Formerless VC, Ferrofluid cooled, Light and compact and suitable for auto or home use. Round flange version of the TW010E1. This is probably the most copied tweeter in recent times. The flangeless version was used in millions of auto sound coax systems.

Made in France
Previously named TW74A
Formerless VC
Ferrofluid cooled
1st order above 6K
Exceptional transient response
Flange 74mm
Cut-out 48mm
Depth 14.4mm

Znom 8 ohm
Re 5.5 ohm
Le@1kHz .03 mH
fs 3000 Hz
Qms -
Qes -
Qts -
Mms .11 g
Cms - mm/N
Sd .03 cm2
BL 1.3 N/A
Vas - ltrs
Xmax 0.25 mm peak
VC Ø 10 mm
1W / 1m 90 dB
Nom. Power DIN 25 W
Net weight 0.05 kg



Comment on Facebook

Product Reviews

Login or Register to write a review.
Reviewed by Seren2
09/27/2012 - 05:20:27 PM
'I was privileged enough to work at Duntech in the mid eighties, John Dunlavy's Australian venture. Duntech, along with the well regarded Sovereign 2001, also made PCL-3 and PCL-5 wall speakers under the Audio Standards Corporation brand. These drivers were used in the PCL-3 and PCL-5 which were also held in high regard during that period. This tweeter when used properly can deliver very good sound for the price. Its only downside is power handling; you need to be conservative and sensible with crossover points. This driver could partner very nicely with a smaller mid-bass driver for a small bookshelf speaker for low to medium level listening with excellent results. If you are on a tight budget and they meet your other technical requirements for a tweeter do consider these. Maybe get some extras as spares given the price.' Review by Gary Williams. Posted by Madisound.