Hypex FusionAmp FA501

Hypex FusionAmp FA501
Click to enlarge

More images

Click to enlarge
Price: $430.60

Purchase

Manufacturer: Hypex Electronics
Product ID : Hypex-FA501
Weight: 6.00 lbs
Manufacturer: Hypex Electronics
E-mail to a friend | Add To Wish List

Description

Hypex FusionAmp FA501 Mono 500W

The FusionAmp is our new plate amplifier range, powered by our new mains powered NCORE modules. There are one, two and three way systems available, each with balanced and unbalanced analog inputs. The one-way models also have a high level analog input. The multi-way models have a digital input instead. 

This FusionAmp can be the basis of e.g. a powerful active subwoofer or a one-way monitor. The FA501 has one powerful 500 Wrms Ncore® amplifier.

The FusionAmp is designed to be mounted in vertical or horizontal position. The FusionAmp may be tilted 45° in both direction as depicted. Vent holes should not be covered and free convection should not be impeded.

To protect your valuable drivers, the DSP does not contain a filter out of the box. A filter needs to be configured and uploaded using Hypex Filter design (HFD) software before the FusionAmp will produce an output signal. Please refer to the online HFD manual for more information. Since the FusionAmp’s DSP does not contain a filter by default, you need to get started with HFD. This free software can be downloaded from the Hypex website. You can start getting acquainted with the software, even without a Hypex product connected. An elaborate guide on how to design the filters can be found on the Hypex website.

The Fusion Amp must be mounted into the speaker cabinet with 8 or 10 screws, not included. Hypex recommends Phillips head screws, 4.3 x 25.4 mm.

Fusion-Amps can also be operated with remote control for volume control and source selection. Our well known Hypex Remote Control can be used for this. To use a remote, you will need the new IR-receiver kit, also available as a separate module via the pull-down menu.

Hypex Manual PDF



Specs

Mains voltage input 100-120Vac / 200-240Vac ±10%
Power (4Ω) 1x 500Wrms
Channels 1 channel / 1 way
Dimensions mm 280*135*55mm
Weight 925gr


Connections

  • Analogue balanced XLR in and through
  • Analogue unbalanced RCA input
  • High level input
  • USB 2.0 configuration interface

Features

  • 15 biquads per amplifier
  • Three selectable presets for filters
  • Source selection
  • Signal detect
  • Auto shutdown
  • Clip protect
  • Thermal protect
  • Filter protection

Meet the family

The Fusion Amp family consists of the following models:

FusionAmp One-Way models:
FA251, 1x250W
FA501, 1x500W

FusionAmp Two-Way models:
FA122, 2x125W
FA252, 2x250W
FA502, 2x500W

FusionAmp Three-Way models:
FA123, 2x125W + 100W Tweeter
FA253, 2x250W + 100W Tweeter
FA503, 2x500W + 100W Tweeter

What is included in the box:

  • The FA501
  • A printed copy of the user guide
  • Speaker connection cables
  • High-level input connector




Comment on Facebook

Product Reviews

Login or Register to write the first review.