ScanSpeak Discovery 26W/4558T 10" Subwoofer

ScanSpeak Discovery Line 26W/4558T 10" Black Aluminum Cone Subwoofer - 269mm- 4 ohm

Spec Sheet PDF

The Discovery series offer traditional design, superior sound, a solid construction, and a wide range of variants. Combining these elements - plus a wealth of technical features and finesses - gives our customers the possibility of acquiring a tailor-made Scan-Speak solution with very good performance at a reasonable low price point! F3 below 30 Hz in 2cf vented- see below.

• Aluminium Cone, Black Anodized
• Fiberglass/Paper Sandwich Dust Cap, Black Coated
• 56 mm peak excursion – 25mm linear (X-max)
• Aluminum Short Circuiting Ring
• Aluminum Pole Piece Extension to reduce distortion and power compression
• Titanium Voice coil former
• Vented cone / dustcap
• Nomex spider
• Low damping rubber surround
• Litz wire woven into the spider

Suggested box alignments:

• Sealed box of 0.5 cubic foot for use in autosound systems.
• One cubic foot box with matching 26W/0-00 passive radiator for use in home or autosound systems. For home, it would be best to use a plate amplifier with a boost. You'll get plenty of cabin gain in an autosound install. 
• Two cubic feet with a 3" diameter vent by 12" long for an F3 of 27Hz.  
•