Morel TiCW1258FT Titanium Series 12" Subwoofer- 8 Ohm

Morel TiCW 1258Ft Titanium Series 12" Fiberglass Cone Subwoofer- 305mm- 8 Ohm

Spec Sheet PDF

Titanium voice coil formers improve the performance of a voice coil with greater strength and heat conduction. F3 below 30 Hz in vented box (see below).

To create the Titanium Ultimate high fidelity 12" subwoofer, Morel uses an extra-large, 5.1" diameter, Hexatech™ aluminum voice coil wound on a vented titanium former. Moving this massive cone requires huge amounts of magnetic force, so Morel uses a high flux double magnet system. Speed-robbing energy storage is highly reduced (0.62 mH) through the combination of the titanium former and a copper-sleeved pole piece. Trapped sound waves within the subwoofer are virtually inexistent due to the Uniflow™ cast aluminum chassis, which works with the Accucenter™ self-centering cone assembly to reduce distortion and the effects of power compression.

• Uniflow™ Aluminum diecast chassis
• High flux double Ferrite magnet system
• Coppersleeve Neolin Motor
• 5.1" Large Hexatech™ Aluminum voice coil
• Titanium coil bobbin
• One piece paper cone/center dome
• Accucenter™ self centering cone assembly

Sample Box Tunings:

• 1.35 cubic foot sealed, F3= 44 Hz
• 2.8 cubic foot vented, 3" diameter by 12" long, F3= 26 Hz recommended

Since 1975, Morel has been on an ever-evolving quest to create the perfect, ultimate loudspeaker. This dedication is apparent in every product they produce: tweeters, midranges, woofers, and finished systems that serve the Hi-Fi, home theater, and car audio markets. Morel systems are today sold in more than 55 countries around the globe. Their products are made with exceptional care; each is assembled by hand and extensively tested, undergoing seven different quality assurance steps, to ensure only the highest standards are met.