Mundorf 27 ohm Metal Oxide Film Resistors

27 Ohm Metal Oxide Film Resistors - Mundorf

Spec Sheet PDF

"M-Resist MOX"

In contrast to normal wire resistors, metal oxide film resistors exhibit no residual inductivity. Therefore, in all cases where impulse velocity is important, in the middle range for example, metal oxide film resistors should always be chosen. The design which we supply has a continuous load capacity of 10 Watt, but can handle a much higher load in the impulse range.

L = 52 mm

D= 8 mm

Wire = 0.8 mm x 35 mm