Mundorf 56 ohm Metal Oxide Film Resistors

56 Ohm Metal Oxide Film Resistors - Mundorf

Spec Sheet PDF

"M-Resist MOX"

In contrast to normal wire resistors, metal oxide film resistors exhibit no residual inductivity. Therefore, in all cases where impulse velocity is important, in the middle range for example, metal oxide film resistors should always be chosen. The design which we supply has a continuous load capacity of 10 Watt, but can handle a much higher load in the impulse range.

Wire two in parallel for 28 ohm and higher power handling.

Wire three in parallel for 18.6 ohm

Wire four in parallel for 14 ohm

Wire five in parallel for 11.2 ohm

Wire 6 in parallel of 9.3 ohm

L = 52 mm

D= 8 mm

Wire = 0.8 mm x 35 mm