Fountek NeoCd3.5H Horn Tweeter

Fountek NeoCd3.5H Horn Tweeter
Click to enlarge
Price: $57.00

Purchase

  • Buy 10 - 10,000 and get an additional 10 % off
Manufacturer: Fountek
Product ID : neocd3.5h
Weight: 2.00 lbs
Manufacturer: Fountek
E-mail to a friend | Add To Wish List

Description

Fountek NeoCd3.5H Horn Tweeter

  • Neodymium magnet system
  • 3" reinforced sandwich ribbon
  • built in transformer
  • low distortion
  • wave guide
Ribbon tweeters show a dead short to the amplifier.  You must use a capacitor on the tweeter even with an electronic crossover to protect the amplifier. We recommend a 20mfd capacitor when using an electronic crossover.






Comment on Facebook

Product Reviews

Login or Register to write a review.
Reviewed by AlexTF1
AlexTF1 bought "Fountek NeoCd3.5H Horn Tweeter" on our website
12/27/2017 - 07:09:07 AM
The ribbon taste
This serious ribbon tweeter (as auditioned, reviewed and measured by various famous people) is a good choice for one wanting to experiment the ribbon taste.
Its great performing response (ncluding the famous ribbon horizontal dispersion), low distortion, and ability to cross over a little lower than most ribbons at that price results in a great sound.
Reviewed by chrlsflwrs
chrlsflwrs bought "Fountek NeoCd3.5H Horn Tweeter" on our website
10/29/2012 - 03:15:40 PM
Now i know what "air" & "ambiance" sound like!!
Looking to further upgrade my Klipsch LaScalas, i purchased a pair of these almost on a whim. I hacked into the tweeter output on my ALK custom crossovers and wired these up. They are sitting on top of the cabinet. I dont think there is any way to make them fit. Incidentally, they dont look to bad there, my scala's are black anyway. Adjusted my eq to account for the lower sensitivity of these compared to the other drivers in the speaker. Only required about a 3db bump from the crossover freq, 6k, and up.

Didnt have too long to fully tweak the eq, but WOW!! I was sorry I had to go out Sat night, I could have sat in front of them all evening. The difference in soundstaging was immediate and profound. Imaging and detail were SO MUCH nicer. The stock tweeter is really rough in comparison. These are light and very airy. Cant wait to spend more time with them,

If you have a lascala and can use a phillips scewdriver, I say 'what are you waiting for?' For the money, its a no brainer upgrade.

I imaging they will work well for any number of applications, of course YMMV.

Recommended

Reviewed by Seren2
09/27/2012 - 03:50:36 PM
NeoCd3.5H
'Excellent! It's my favorite. Matched for 2-way and 3-way. http://www.artmaydan.org.ua/loudspeakers/gui_left.jpg' Review by Yury Galetskyy. Posted by Madisound.