Satori MW16P-8 6" Egyptian Papyrus Cone Woofer - 8 ohm
MW16P-8 x2 + T25CF002 MTM Crossover Design
MW16P-8 x2 + TW29R MTM Crossover Design
MW16P-8 + T29CF-002 2way Passive Crossover Design
Satori is a Buddhist term for enlightenment. The word literally means "understanding". Satori translates as a flash of awareness. Satori drivers are designed for subtlety and realism.
- Vented aerodynamic cast aluminum chassis for optimum strength and low compression
- Proprietary cone material with EGYPTIAN PAPYRUS fibres made in-house
- Soft low damping rubber surround for optimum transient response
- Advanced BIMAX spider for improved linearity
- Powerful optimized low distortion neodymium motor system
- Non-conducting fibre glass voice coil former for minimum damping
- Extended copper sleeve on pole piece for low inductance and reduced distortion
- CCAW voice coil for reduced moving mass
- Long life silver lead wires attached 180° apart for improved stability
- Vented pole piece for reduced compression
- High piston to chassis diameter ratio
- Gasket and bolt hole protrusions for reduced coupling to speaker cabinet
Here are some box alignments you might consider using.
- For a sealed box try 0.3 cubic foot (8.5 liters) with 50% filling for an F3 of about 73Hz.
- In 1/2 cubic foot (14 liters) with a 1.5" vent by 7" long your F3 is about 50Hz.
- In 0.7 cubic foot (20 liters) with a 2" vent by 7" long your F3 is about 42Hz.
Manufacturer Datasheet PDF