Satori MW16P-8 6" Egyptian Papyrus Cone Woofer - 8 ohm

• MW16P-8 x2 + T25CF002 MTM Crossover Design
  
• MW16P-8 x2 + TW29R MTM Crossover Design
  
• MW16P-8 + T29CF-002 2way Passive Crossover Design

Satori is a Buddhist term for enlightenment.  The word literally means "understanding".  Satori translates as a flash of awareness.  Satori drivers are designed for subtlety and realism. 

• Vented aerodynamic cast aluminum chassis for optimum strength and low compression
• Proprietary cone material with EGYPTIAN PAPYRUS fibres made in-house
• Soft low damping rubber surround for optimum transient response
• Advanced BIMAX spider for improved linearity
• Powerful optimized low distortion neodymium motor system
• Non-conducting fibre glass voice coil former for minimum damping
• Extended copper sleeve on pole piece for low inductance and reduced distortion
• CCAW voice coil for reduced moving mass
• Long life silver lead wires attached 180° apart for improved stability
• Vented pole piece for reduced compression
• High piston to chassis diameter ratio
• Gasket and bolt hole protrusions for reduced coupling to speaker cabinet

Here are some box alignments you might consider using.

• For a sealed box try 0.3 cubic foot (8.5 liters) with 50% filling for an F3 of about 73Hz.
• In 1/2 cubic foot (14 liters) with a 1.5" vent by 7" long your F3 is about 50Hz.
• In 0.7 cubic foot (20 liters) with a 2" vent by 7" long your F3 is about 42Hz.