ScanSpeak Classic D2905/9500 1" Tweeter Textile Dome

Manufacturer: ScanSpeak

2 Customer Review(s)

Product ID: d2905_9500

$162.10

Volume Pricing

10 - 10,000
10% off

Add to wish list E-mail to a friend

Overview

ScanSpeak Classic D2905/950000 1" Textile Dome Tweeter- 104mm- 6 ohm A true classic, used in many designs over the years.

ScanSpeak Classic D2905/950000 1" Textile Dome Tweeter- 104mm- 6 ohm

Spec Sheet PDF

A true classic, used in many designs over the years. Use this tweeter as an upgrade replacement for the D2905/9300.

1" Textile Dome Diaphragm
Low Resonance Rear Chamber
Ferro Fluid
Black Painted Alu Face Plate

The Scan-speak D2905-950000 is similar to the D2905/9300, but with non-resonant chamber. The optimized pole piece geometry reduces flow resistance and the anti-resonator-plug in the rear chamber eliminates turbulence. A light ferrofluid is used in the air gap to ensure optimal linear mechanical behavior and minimal micro-dynamic non-linearity. This tweeter has a smooth transparent sound and very low levels of distortion. A perfect choice for any high end system.

The Classic tweeters are among the many highly praised designs in Classic series. They have enjoyed success over three decades. And still among the best tweeters available. The D2905/9000 tweeter kick-started a new era with a line of very high quality 1" tweeters, today known as -9300, -9500, -9700 and -9800. Despite their many years on the market still used in many top high-end speakers around the world.

2 Customer Review(s)

Excellent tweeter

Reviewed by Sholmblad on 12/30/2020

I have an in-wall home theater surround sound system. Thought I’d try replacing the drivers in the center channel. I chose this tweeter along with a 6.5” SB acoustic woofer. All I can say is, WOW! I have pretty high quality Speakers that sound great as is. The only bad news about the success of this experiment is I need to replace all of them now!

I did remove the mouthing ring and secured it from the back of the i wall speaker frame. I used a basic 12 db 2way crossover @ 3000 hz

Verified Purchase

Awesome in Silverline SR11s

Reviewed by Edpadden@yahoo.com on 12/06/2011

Hello. I replaced the stock tweeters in my Silverline SR11s with a pair of the 9500s. The difference was amazing. Much more open and detailed over the stock ones. I was able to run them with a single 3.3uF cap that i upgraded with no resistor. The stock tweetes used a 6.8 Ohm resistor. A perfect match to the stock woofer. Blends well too.