Scan-Speak CCB-5075 5.5" 2-way Speaker Kit

Scan-Speak CCB-5075 5.5" 2-Way Speaker Kit

Compact Classic Bookshelf Loudspeaker 

Small speaker with big sound! This tiny speaker measures 5.9" wide x 10-5/8" tall x 8-11/16" deep, with an internal volume of approximately 5.5 liters, but sounds MUCH larger. It features the new 20mm D2010/852100 neodymium magnet tweeter and 15W/8534T00 Phenomax cone midwoofer. Fittingly, both drivers are from the Classic family in the Scan-Speak line.

Each CCB-5075 Speaker Kit Includes:

• (2) Scan-Speak Classic D2010/852100 3/4" Dome Tweeters
• (2) Scan-Speak 15W/8534T-00 Phenomax 5.5" Midwoofers
• (2) Professionally Assembled Crossovers (details below)

Frequency Response

Crossover Schematic

Madisound Crossover Info

Each crossover is professionally assembled by Madisound on our silver tinned inlaid OFC copper circuit board. 

The tweeter uses a ClarityCap CSA cap and Mundorf CopperNickel resistor. 

The midrange inductor is a Mundorf 16 awg Copper Foil, with a polycap and Mundorf MOX resistor in the parallel circuit.

Upgrade and cost saving options are available from the drop down menu. 

Scan-Speak Classic D2010/852100 3/4" Dome Tweeters

Key Features:

• Wide Dispersion
• Diffraction Damping Cell Rubber Front
• Dual Rear Chamber
• Vented Pole Piece
• Neodymium Magnet

Scan-Speak 15W/8534T-00 Phenomax 5.5" Midwoofers

Key Features:

• Phenomax 5-layer Cone Material
• Patented Symmetrical Drive Motor Design
• 38mm Voice Coil on Titanium Former
• Low Loss Linear Suspension
• Aluminium Chassis
• Smooth Midrange Response

CCB-5075 Cabinet Drawing

• The back panel should be cut for your input cup or binding posts of choice. Don't cut that square hole.
• The recommended port is 45mmØ x 145mm long. Cut the port hole for the port you choose. If flared, it might need to be lower too to fit.
• Equivalent ports: 1.75"Ø by 5.5" long
• The PT-415 flared port will work too