SB Acoustics SB17CRC35-8 6" Woven Carbon Fiber Cone Woofer - 8 ohm

Manufacturer: SB Acoustics

1 Customer Review(s)

Product ID: SB17CRC35-08

$110.00

Product is out of stock

Add to wish list E-mail to a friend

Overview

SB Acoustics SB17CRC35-8 6" Woven Carbon Fiber Cone Woofer - 171mm- 8 ohm

SB Acoustics SB17CRC35-8 6" Woven Carbon Fiber Cone Woofer - 171mm- 8 ohm

Manufacturer Specifications PDF

Rohacell®/Carbon fibre sandwich cone for optimized stiffness/damping ratio
Vented cast aluminum chassis for optimum strength and low compression
Low damping rubber surround for improved transient response
Non-conducting fibre glass voice coil former for minimum damping
Extended copper sleeve on pole piece for low inductance and low distortion
CCAW voice coil for reduced moving mass
Long life silver lead wires
Vented pole piece for reduced compression

Suggested Box Alignments:

Sealed box of 0.25 to 0.3 cubic foot for an F3 of 74Hz
Vented box of 0.5 cubic foot with 2" vent by 8" long for F3 of 47Hz
Vented box of 0.7 cubic foot with 2" vent by 6" long for F3 of 40Hz

1 Customer Review(s)

Verified Purchase

SB17CRC35-8 in WaveGuide MTM

Reviewed by ZX14Dream on 06/10/2025

I am so impressed with these. I have a ways to go in my Xovr work and have them crossed a little to high, but the clarity and mid bass / bass is very nice. My box tuning might need tweaking as I have a 62.5 hz spike that I have not seen in this room before. My impression is these are quick and go lower than I thought would be the case. As I move forward with this project I am moving towards a LR4LPLWR LR4HPLWR. So far I am shooting for 1500hz and some cleanup gained from the steeper slope. Currently these are playing with a Dayton generic 2.5K Xovr. Even that is sounding pretty incredible. Voices and Horns are very nice at listening distance.