Audax HM210C0 8" Carbon Fiber Woofer

Audax HM210C0 8" Woven Carbon Fiber Woofer

Designed for high end 2 or 3-way self standing systems, this 8" Bass-Midrange driver offers the advantages of a very stiff and light woven Carbon Fiber cone coupled to a high loss rubber suspension. Bass reproduction is firm, tight and dynamic while the cone motion is well damped and controlled by the high compliance, high loss rubber surround. Special consideration has been taken to ensure the best possible transient response, and an exceptionnally natural top end roll-off.

Unobstructed venting of the Zamack die cast chassis, coupled with a grill protected, vented pole piece and a soft polymer dustcap all contribute to the dramatic transient response. High power handling results from the flat, edgewound copper coil mounted onto a fiberglass reinforced Kapton voice coil former. Gold plated terminals offer excellent solderability. Made in France.

• Non resonant cast frame
• Woven carbon fiber cone
• Ventilated spider
• High temperature voice coil
• Very flat and extended frequency response

0.7 cubic foot sealed box for an F3 of 65Hz

1.25 cubic feet vented box with 2" diameter port by 5" long for an F3 of 45hz.

2.0 cubic feet vented box with 3" diameter port by 7" long for an F3 of 40Hz.

Note: The image on the mechanical drawing is not the HM210C0.