Goertz Inductors 12 AWG

Goertz 12 AWG Copper Foil Inductors: 1000 Watts; Leads: 0.010 x 0.321 inch, copper; Conductors: 99.99% pure, copper; Dielectric: 0.0015 inch thick, polypropylene film; Inductance Tolerance: +/- 2.5%; and Inductance Reactance: Flat from 5Hz to 50kHz.

Goertz Copper Foil Inductors

High-technology laminating from Alpha-Core/Goertz makes it possible to manufacture inductors from high purity copper foil wound onto a Lexan polycarbonate tube. Foil inductors are mounted by means of a single polycarbonate screw through the central bore, or a silicone elastomer, or a hot-melt adhesive. Foil inductors have obvious advantages over wire-wound inductors in terms of improved electrical and sonic characteristics. This important new development has much to contribute to the design of state-of-the art loudspeaker crossover networks.

Negligible skin effect below 100 kHz which are many orders of magnitude below conventional wire-wound types. High winding tension and vacuum fusing of faces provide. High dimensional stability, effectively locking the conductors in place. Wire-wound inductors, which allow relative motion of conductors due to electromagnetic forces, will exhibit FM distortion by the process of reactance modulation. Flat inductive reactance from 5 Hz to 50 kHz. No saturation distortion due to air-core design. Inductors contain no magnetic materials. Reduced power loss. Highest space factor (ratio of conductor cross area to total cross-section) means lower DC resistance within comparable dimensions. Negligible power loss due to skin-effect. Extremely low stored charge. Cool operation even during prolonged high output power operation. The high space factor and winding density results in improved heat dissipation.