Supra CombiCon Spade - Pair

Supra CombiCon Spade - Pair

Spec Sheet PDF

See Combicon Banana version here.

Supra CombiCon Series - A versatile, robust series of contacts

The Supra CombiCon allows for changing contacts from BFA/banana to Fork in a blink of an eye. And back again for that matter, providing for exceptional freedom and flexibility for any new demand. Electrically, the Supra CombiCon matches any of our cables and the design specification was clear-cut, it must not be a bottleneck for our Supra Sword speaker cable. Rest assure, there is not any contact, making a better job for Supra cables, even though there are much more expensive.

This combination connector comprises two parts: a connector body with a M6 thread that attach to the cable in two ways; straight or 90°, and contact part with M6 thread that fits the connector body. The contact part may be either the optional Fork, the BFA/Banana pin or a combination of both depending on access angle to the speaker terminal.

24K gold plated loudspeaker connector for cables up to 6mm2 (10AWG). The cable can be attached straight on axis or at a 90 degree angle. A spade can be attached to the connector body for jumper connections. Spade opening is 4.5mm and 9mm.