SB Acoustics SB29NRX75-8 10" Woofer - 8 ohm
This 10" woofer features a proprietary composition paper cone with a special coating. The rubber surround has been carefully chosen to properly dampen the cone movement. The open-structure cast frame has been specially engineered for minimum reflections and good air flow. This woofer will perform best in a ported enclosure (see alignments below).
- Hard paper cone for improved piston operation (made in-house)
- Vented pole piece for minimum compression
- Vented cast aluminum chassis for optimum strength and low compression
- 3” copper voice coil for improved power handling
- Long life silver lead wires
- Low damping rubber surround for improved dynamic linearity
- Non-conducting fiber glass voice coil former for minimum damping
Suggested Enclosures:
- Standard hi-fi tuning: 1.9 cf3 (~53 liters), minimal damping, single straight vent 2" x 4.6" F3 = 32 Hz
- Extended bass tuning: 3.3 cf3 (~94 liters), minimal damping, single straight vent 3" x 8.3" F3 = 26 Hz
- Sealed box: 0.5 cf3 (~14 liters), heavy damping, F3 = 65 Hz.
Dimensions:
- Flange diameter: 290mm
- Cut out diameter: 249mm
- Depth: 133mm
- Flange thickness: 10mm
- Screw mounting diameter: 268mm
- Screw hole size: 5.5mm