ScanSpeak Revelator 26W/4867T 10" Woofer Black Aluminum Cone

ScanSpeak Revelator 26W/4867T 10" Black Aluminum Cone Woofer- 260mm- 4 ohm

Spec Sheet PDF

The Revelator woofers and subwoofers features very rigid cones in paper or aluminium that operates as a piston over a wide frequency range, in combination with Scan-Speaks low-loss linear suspension and the patented Symmetrical Drive (SD-1) it results in very low distortion and a smooth and well behaved frequency response as well as perfect transient reproduction.

New 4 ohm version of the black Aluminum cone Revelator woofer! Aluminum is a good material for subwoofer cones, very stiff and light. These cones reduce distortion and also help cool the voice coil by conducting heat away from the coil. This woofer has a low loss suspension for increased bass response and the SD-1 motor system for less intermodulation distortion. Very rigid cast frame, large windows. Low Qts for vented box use- see below.

• Patented Symmetrical Drive Motor Design
• Rigid Black Anodized Alu Cone
• Low-Loss linear suspension
• Low Damping SBR Rubber Surround
• Die cast Alu Chassis vented below spider
• Ferrite Magnet System w. Rubber Boot

Madisound recommends:

1.25 to 1.5 cf3 sealed for f3 of 45Hz, f6 of 35Hz

or

2.75 cf3 ported with single 3” x 12” straight vent for f3 of 29Hz